Calculus III
(Math 2401, sections B1 and B3)

Mihalis Kolountzakis

School of Mathematics
Georgia Institute of Technology
686 Cherry Street NW
Atlanta, GA 30332

E-mail: kolount AT gmail.com

January 2005

# 1 What the course is about

You can also have a look at last semester's web site of mine for the same course.

# 2 Schedule

Main lectures: MWF 10:05 - 10:55, in Skiles 249.

My office hours are: 11-1 Wednesdays, in my office (Skiles 209). You're also welcome to ask me questions any time you see me, anywhere.

Recitation sessions: TTh 10:05-10:55 in Instr. Center 219 (section B1, instructor Sujin Ahn) and in Skiles 149 (section B3, instructor Reshma Parekh).

Reshma
Office hours every Tuesday, 11-12 in Skiles 154. MathLab hour Thursdays 11-12 in Skiles 247.
Sujin
Office hours every Tuesday and Thursday from 1-2 in Skiles 137. MathLab hour Mondays 3-4 in Skiles 257.

One midterm exam will be given and a final. Each week you will also write a short one-question test during the last 15min of your Thursday meeting with the TAs. These quizzes will be part of your grade, after the two worst of them are discounted.. There will be no quiz on the first week of classes.

Homework will be assigned but will not be normally collected. Do it to be adequately prepared for the quizzes and the tests, as the problems on these will be small variations of those on the homework assignments.

# 4 Course Progress

## 4.1 M, 1/10/05: First meeting

We went over the course procedures and policies.

We talked about the material in §13.1 of the book. We saw what are vector functions of a scalar variable and how we usually interpret them. Also what it means that

and properties satisfied by the limit in the case of vector-valued functions. This limit can be defined using the distance between and , as (it must tend to 0) or componentwise. We can also define the derivative and the integral of a vector-valued function componentwise.

Do problems §13.1: 39, 40, 43, 46, 51, 57.

## 4.2 W, 1/12/05: Rules of differentiating vector-valued functions

We covered §13.2 and saw that differentiation of vector-valued functions satisfies rules very similar to that of scalar-valued functions.

Do problems §13.2: 6, 9, 28, 29, 31, 33.

## 4.3 F, 1/14/05: Parametrized curves

We covered §13.3. We saw what the unit tangent vector to a parametrized curve is, and that its derivative vector is orthogonal to it. We also saw what the principal normal vector is (the normalized derivative of ), and that the plane containing and the vectors and is called the osculating plane. We saw the mechanism for deriving its equation.

Do problems §13.3: 1, 2, 9, 11, 14, 33, 35, 36.

## 4.4 W, 1/19/05: Arc length

We saw how to compute the length of a curve given in parametric form. We did not prove this formula, but we did verify it for line segments and polygonal curves. We proved that the result of this formula is independent of the parametrization. That is, if we take a curve and parametrize it in two different ways (for any curve there are infinitely many ways to parametrize it), apply our formula for the length to each parametrization, we shall find the same result. This is of course what one should expect, as the length of the curve is a geometric quantity. This means that it only depends on the shape of the curve, not the way it is presented to us (the parametrization).

Do problems §13.4: 7, 9, 17, 21, 23.

## 4.5 F, 1/21/05: Curvature of plane curves

We covered part of §13.5. We defined the curvature of a planar curve as the derivative, with respect to arc-length , of the angle which the tangent to the curve makes with the -axis. We then proved two formulas useful for the computation , one for a curve given as the graph of a function and one, more general, for the parametric curve .

## 4.6 M, 1/24/05: Curvature of space curves and how to compute it using the acceleration vector

We proved that for a planar curve there is the alternative expression for the curvature

We adopted this as our definition of curvature of space curves (where the definition originally given as the curvature for planar curves does not apply).

We showed how to decompose the acceleration vector into a tangential and a normal component, and how to calculate the curvature of a space curve using this decomposition and a clever use of the cross product. This route avoids the calculation of derivatives of quotients with (usually) square roots in their denominators.

Do problems §13.5: 2, 5, 6, 10, 13, 14, 21, 22, 41, 42, 58.

## 4.7 W, 1/26/05: Vector calculus in Mechanics

We covered §13.6. We saw how to apply some of the things we've seen so far to problems of Mechanics (motion of particles under certain forces). In particular, we proved Kepler's 2nd law which states that if a particle is moving under the influence of central force (force parallel to the location vector) then its location vector sweeps out equal areas in equal times.

We did not have time to cover the subsection on initial value problems. Please go over Examples 3 and 4 on p. 809 and 810.

Do problems §13.6: 2, 3, 5, 7, 8, 15.

## 4.8 F, 1/28/05: Kepler's laws of planetary motion

We stated Kepler's laws for planetary motion and more or less proved the first law, which states that the orbits are ellipses.

No homework assignment from this section (§13.7).

## 4.9 M, 1/31/05: Scalar-valued functions of a vector-variable

We say examples of functions depending on two or more inputs and returning a single number as their output (scalar-valued, vector-variable). We saw how to find their domain and range. We saw what it means for a function to be bounded. A function is called unbounded otherwise.

Do problems §14.1: 1-10, 35-37, 39.

## 4.10 W, 2/2/05: Quadratic curves and surfaces

We remembered what are the quadratic curves in the plane (curves which are described by a polynomial equation in and of degree at most two). These are precisely the ellipse, the parabola, the hyperbola, straight lines and pairs of straight lines.

We also went through the quadratic equations in , and , and saw several examples of what kind of surfaces these define. We did not exhaust the list. The emphasis is on being able to guess the shape of the surface from its equation by cleverly fixing some of the variables.

Do problems: §14.2: 2, 4, 10, 22, 26, 40, 43.

## 4.11 F, 2/4/05: Level curves and surfaces; Partial derivatives

We talked about how to draw a two-variable function using its level curves for various levels. We also talked about level surfaces and computed some examples. The partial derivatives of a function of two or more variables were defined and their geometric significance discussed.

Do problems §14.3: 4, 5, 8, 14, 20, 21, 25, 28.

## 4.12 M, 2/7/05: Partial derivatives and their geometric meaning

We saw the definitions, and several different notations, of the partial derivatives of multivariable functions with respect to each of their variables. Each such partial derivative can be viewed as the slope of the straight line, tangent to the graph of the function and projecting parallel to the variable in question. One can use these partial derivatives at a point to derive an equation of the tangent plane to the graph of the function at this point, and we did one such example.

Do problems: §14.4: 1-10, 23, 24, 41, 53.

There have been some complaints that one section had less time to work on a quiz than the other and that this is unfair. This is indeed so and from now on the two sections should each have exactly 15 min to work on each problem.

Apart from this, I would like to reassure you that this event will have minimal effect on your grades, as the two sections will be assigned their letter grades without any reference to the other section, at the end of the semester, so that any inflated grades for one should not affect the other. And I would also like to remind you that for each of you the two worst quizzes will be discounted at the end. This policy takes care of many such disparities by itself.

## 4.13 W, 2/9/05: Open and closed sets

We covered the material in §14.5: what is a neighborhood of a point, which points of a set are called interior points, which are boundary points, which sets are called open and which closed. We gave several examples.

Do problems §14.5: 1-20.

### 4.13.1 ANNOUNCEMENT: Midterm exam

The midterm exam will cover Chapters 13-15. This should happen roughly a month from now. I will specify the exact date later.

## 4.14 F, 2/11/05: Continuity of multivariable functions, partial derivatives and mixed second order derivatives

We defined formally what the limit of a two-variable function is when , and when a function is continuous at a point . We calculated the limits using the definition for some very simple functions. We proved that composition of continuous functions preserves continuity.

We also saw examples of functions of two variables which exhibit strange behaviour, by one variable standards. For example we saw a function which is everywhere continuous with respect to each of the variables and has everywhere partial derivatives, yet is not continuous at (0,0).

We saw (without proof) conditions that guarantee that the mixed partial derivatives of a function are equal.

Do problems §14.6: 1-5, 21, 23, 24, 26, 27.

## 4.15 M, 2/14/05: Differentiability of multivariate functions. The gradient of a function

We defined what it means for a function of many variables to be differentiable at a point , and also defined the gradient of a differentiable function at , as the only vector that makes the following true:

We then saw that if a function has continuous partial derivatives at a point then it is differentiable there and the components of its gradient are just its partial derivatives with respect to the corresponding variables.

Do problems §15.1: 12-16, 33-37, 39, 40.

## 4.16 W, 2/16/05: Gradients and directional derivatives

We talked about the concept of directional derivatives and how to compute them using the gradient of a function. Also saw that the direction of the gradient is the direction of maximum rate of increase of a function. Saw several examples.

Do problems §15.2: 11-14, 23-26, 40, 41.

## 4.17 F, 2/18/05: Mean Value Theorems; Chain Rules

We went over the Mean Value Theorem for scalar functions of one variable, and used it to prove the mean value theorem for scalar functions of a vector variable. We remarked that the Mean Value Theorem is not true for vector valued functions. We saw some consequences of the MVT: if two functions have the same gradient in a connect set then they differ by a constant.

Next we reviewed the chain rule for functions of one variable and saw teh form it takes for the composition of a scalar function of a vector variable with a vector valued function of one variable.

We also saw how to differentiate functions defined implicitly.

Do problems §15.3: 1, 3, 4, 6-8, 17, 18, 25, 27, 29, 30, 36, 58.

## 4.18 M, 2/21/05: The gradient as normal vector to level curves and surfaces

We pointed out that is a normal vector to the curve (or surface) , a constant. We used this to compute normal and tangent vectors to curves and surfaces amd also angles between curves and surfaces. These angles are defined to be the corresponding angles between their tangent objects at the intersection. For example, if we are seeking the angle between a curve and a surface which intersect at a point we must measure the angle between a tangent vector of the curve at and the tangent plane to the surface at . This is most easily measure by first finding the angle between the tangent to the curve and the normal to the tangent plane, and then subtracting that angle from .

Do problems §15.4: 1, 2, 10, 11, 19, 20, 26, 27, 28, 34, 36.

### 4.18.1 ANNOUNCEMENT: Midterm exam on March 7

The midterm exam will cover Chapters 13-15. It will be held during the ordinary class meeting on Monday, March 7, 2005. Three or four problems will be on the test. You are advised to check the web-page for the same class of last semester in order to familiarize yourselves with the style of the upcoming test. Only calculators will be allowed.

On Friday 3/4 we will have a review session.

## 4.19 W, 2/23/05: Local extrema

We saw what is the analogue in two variables of the criteria, involving first and second derivatives, that we know for deciding where a function's local maxima and minima are. The first stage of the method is to locate the points where the function's gradient vanishes. Each of those points is then checked using higher order partial derivatives of the function at that point in order to decide if there is a local extremum at that point or if it is a saddle point.

Do problem §15.5: 1, 2, 5-8, 25, 26.

## 4.20 F, 25/02/05: Absolute extreme values in a given domain

We saw how to find the absolute maximum and minmum for a function of two variables in a given domain (§15.6).

Do problems §15.6: 1-6, 19-22, 27.

## 4.21 M, 2/28/05: Function extremization under side conditions

We talked about the problem of finding the minimum or maximum of a function when is not free to take any values in the domain of definition of but it has to satisfy some condition, which is usually given in the form . Sometimes one can solve for one of the variables in and substitute the resulting expression in thus getting a problem of ordinary function extremization without side conditions and in one variable less. We saw two such examples but this method is most often inapplicable as it is not easy to solve for one of the variables, especially if is a three-component vector and is non-linear. Even if possible the resulting expression for may be too complicated to work with.

We then saw the method of Lagrange (or Lagrange multipliers as it is commonly known), which allows one to solve the above problem by solving a, generally non-linear, system of equations in the unknowns and , the latter being a auxiliary variable which is not used except to help find the values of . The system of equations is

 0

The last equation is actually many, as many as the number of components in (two or three in our cases).

Some examples were discussed, and we will continue with this Wednesday. Meanwhile you can work on the problems §15.7: 1-4, 13, 15, 18, 19, 21, 23.

### 4.21.1 ANNOUNCEMENT: Office hours

I will not hold office hours on Wed, March 2. Please come Fri, March 4, 11-1.

## 4.22 W, 3/2/05: Function extremization under side conditions, continued

We gave some more examples of the method of Lagrange multipliers and saw how it applies to the case of a function of three variable subject to two conditions.

We also saw that there is a way to avoid introducing the Lagrange multiplier (the variable, which we throw away after solving the system of equations). This can be done by checking the parallelism between the two fectors and (the gradients of the function to be optimized and the constraint function) by checking the equation

 (1)

That is, our system of equations consists now of the above equation plus the constraint . It appears odd however that we have three variables (, and ) but four equations (the equation (1) is three equations written as one, as it is an equation between vectors with three components). So how can we expect this system to be generally solvable?

The answer is that the vector equation is really only two equations. If one writes it out (using the determinant form) one notices immediately that any of the resulting three equations can be obtained from the other two, so one can throw away any one of them (but only one) without changing the solutions to our system. Now it is clear that we have three equations in three unknowns.

### 4.22.1 ANNOUNCEMENT: Review

On Friday, March 4, we will have a review session during hour regular meeting. This means that I will come in and answer your questions, which you should prepare. I will not teach any new material.

## 4.23 F, 3/4/05: Review session

The instructor answered questions by the students related to the material taught so far.

## 4.24 M, 3/7/05: Midterm examination

Today we held our midterm examination for 50 min. The problems and their solutions were the following:

1. For the curve given parametrically by :
(a) Find the curvature at time .
(b) Determine the tangential and normal components, and of the acceleration at time .

Solution: We have and . Hence

We also have . So .

Writing and for the normal and tangential components of (in the sense that ), we have

and

2. (a) Find the direction of the straight line (this means: find a vector of unit length parallel to the line) defined as the intersection of the two planes and .
(b) Find the directional derivative of along the direction found at (a).

Solution: (a) The two normal vectors to the planes are given by the coefficients in the respective equations and are and . The intersection of the two planes is a straight line which perpendicular to both these normal vectors (since it belongs to both planes), hence a vector parallel to that line is given by the cross product of the above which is . The vector is a unit vector.

(b) We have

so

3. (a) Find a normal vector to the surface at its point .
(b) Find the equation of the tangent plane at that point.
(c) Find a parametrization of the normal line at that point.

Solution: (a) The surface is a level surface for the function and . So at a normal vector to the surface is

So is of course the vector (half the previous one).

(b) The equation of the tangent plane at is given by

and after the calculations we get

(c) A parametrization is

4. Let be the angles of a triangle. These numbers of course satisfy .
(a) Which constraint equation binds together ?
(b) For which triangle is the quantity maximized, and what is the maximum?
(c) The function in (b) is clearly always strictly positive. Show that it can become arbitrarily small by appropriately choosing the variables .

Solution: (a) The constraint is of course .

(b) Writing for the constraint and we obtain the following system of equations in , , and the Lagrange multiplier :

(The last equation are three equations packaged in one.) Since the last three equations give us after very little manipulation

which, since , implies (the function is 1 to 1 in that interval). The maximum value is .

(c) We have so by choosing triangles with we get arbitrarily small values of .

### 4.24.1 ANNOUNCEMENT: Quiz

There will be a quiz on Thursday, as usual. The material covered is whatever you've been taught from on Monday to the next.

You can find them here. The solutions are above. The tests will be distributed to you during the recitation of Thursday, March 10.

## 4.25 W, 3/9/05: Summation sign

We remembered a few basic things about one variable integrals and how they are defined via sums corresponding to partitions of the intervals of integration. We then introduced the summation sign for both single and double sums and evaluated several examples.

Do problems §16.1: 1-4, 13-17.

## 4.26 F, 3/11/05: Integral of a continuous function of two variables

We defined the integral of a function over a rectangle via lower and upper sums corresponding to partitions of . We evaluated, using the definition, only some simple integrals, and we then saw how to extend this definition to arbitrary domains of integration. Finally we saw some properties of the operation of integration which carry over from the case of one-variable integration.

Do problems §16.2: 1, 2, 6, 7, 10, 11.

## 4.27 M, 3/14/05: Double integrals by repeated integration

When a domain is such that all its intersections with lines parallel to the -axis are intervals, and the set of -values used in the domain consititute an interval the domain is called of Type I (and of Type II if the same properties hold with and reversed). For such a domain we saw how to evaluate a double integral of a function as a single integral whose function to be integrated is an integral itself.

Do problems §16.3: 1-6, 13, 14, 33, 34, 43, 46.

## 4.28 W, 3/16/05: Evaluating double integrals using polar coordinates

We saw how to evaluate a double integral using polar coordinates. The first task is to find the domain in the -plane which corresponds to the given domain (in the -plane). For example, if is the unit disk in the cartesian plane (the -plane) then is a rectangle in the -plane defined by

Next we transcribe the function to be integrated, from the cartesian variables into the polar variables. This is achieved by just substituting for and for . Last, we replace the area element'' by the expression .

Do problems §16.4: 1, 2, 5, 6, 9, 10, 17-20, 23, 24.

## 4.29 F, 3/18/05: Applications of double integrals to mechanics

We covered the examples in §16.5. We saw how to compute the mass of a two-dimensional domain (a plate'') with variable density, and also how to compute its center of mass. We also saw how to compute the moment of inertia of a plate (with variable density) rotating around a line in space. We evaluated some relevant double integrals. Last, we mentioned tha Parallel axis theorem. We did not have time to prove this (the proof is very simple and is in your book) but talked about what it means.

Do problems §16.5: 1-4, 11, 12, 14, 17, 25.

## 4.30 M, 3/28/05: Triple Integrals

We saw briefly how triple integrals are defined (in a completely analogous way to double integrals, so we did not insist much on §16.6) and proceeded to evaluate some triple integrals by repeated integration. We also talked about the average fo a function over a domain on which a density function is defined, and how this applies to the center of mass of a domain with variable mass density.

Do problems: §16.7: 3-6, 11, 14-16, 21-22.

## 4.31 W, 3/30/05: Triple integrals in cylindrical coordinates

We showed how to compute a triple integral after first describing its domain of integration in cartesian coordinates.

Do problems: §16.8: 1-8, 11, 12, 17, 18, 25, 26.

### 4.31.1 ANNOUNCEMENT: Final exam

The final exam will be held during our last regular meeting, on the last Friday of the semester. It will be very similar in format to the midterm exam and will cover mostly the material that was not covered by the midterm.

## 4.32 F, 4/1/05: Spherical coordinates for triple integrals

We introduced the spherical coordinate system and how to use it for evaluation of triple integrals. We saw several examples of how to transform the domain of integration from cartesian to spherical coordinates and carry out the integration in spherical coordinates (the form becomes now ).

Do problems §16.9: 1-4, 9-14, 16, 19, 20, 24, 26, 27.

## 4.33 M, 4/4/05: General change of variables in multiple integrals

We saw the general procedure for evaluating a multiple (double or triple) integral over a domain after first doing a change of variables. This is essentially a way of parametrizing using two or three variables (depending on the whether the domain is in the plane or space) which run over a more convenient domain . We say how to do this when is a parallelogram (and we got a parametrization with paramaters and running through the rectangle ) and also in some other cases. We also saw that the form transforms into the form (and similarly in three dimensions), where is the so-called Jacobian determinant, which can be computed from the functions and .

Do problems §16.10: 1-2, 8-10, 12-14, 19, 20, 27, 29.

## 4.34 W, 4/6/05: Line integrals

We defined the line integrals of a vector field along a curve given parametrically by , , as the expression

We proved that the line integral so defined is independent of which parametrization is being used for the curve , as long as we do not change the orientation. We computed some examples.

Do problems §17.1: 1-4, 7, 15, 16, 20, 21, 23, 25, 28-30.

### 4.34.1 ANNOUNCEMENT: Final exam (correction)

I am sorry but due to University regulations I have to cancel my previous announcement regarding the final exam. Our final exam will take place as scheduled by the University, namely on May 6, at 2:50pm. I will announce the room as soon as I know it.

## 4.35 F, 4/8/05: The fundamental theorem of calculus for line integrals

This says that if a vector field is a gradient field, then a line integral of that along a curve equals the value of (where ) equals where and are the endpoints of . This is true in two and three dimensions, and, in two dimensions, in order to decide if is a gradient field we need to verify that when the domain , where is defined, is simply connected (i.e. connected and with no holes''). We saw several applications of that theorem as well as how to find from .

Do problems §17.2: 1-4, 12, 13, 22, 24-26, 28.

## 4.36 M, 4/11/05: Work and conservation of energy

We discussed kinetic energy and why its change is due to the work is done by the force field on the particle. Also we talked about conservative (gradient) fields and the potential function.

Do problems §17.3: 1-3, 6, 7, 8.

## 4.37 W, 4/13/05: New way of writing line integrals; integrals with respect to arc-length

We saw an alternative way of writing the line integral as , where . We also saw the line integral w.r.t. arc-length, denoted by , where is a scalar function.

Do problems §17.4: 2, 3, 5, 17, 18, 26, 27, 29, 30, 32, 36.

### 4.37.1 ANNOUNCEMENT: Quiz

There will be no quiz during the last week of classes.

### 4.37.2 ANNOUNCEMENT: Message from School administration

From: Rhonda Mozingo <rmozingo@math.gatech.edu>
To: faculty@math.gatech.edu, postdocs@math.gatech.edu, visitors@math.gatech.edu
Subject: Course Surveys
Resent-Date: Wed, 13 Apr 2005 11:05:39 -0400 (EDT)
Resent-From: visitors@math.gatech.edu

[ The following text is in the "ISO-8859-1" character set. ]
[ Your display is set for the "UTF-8" character set.  ]
[ Some characters may be displayed incorrectly. ]

COURSE/INSTRUCTOR SURVEYS:

From 12:00 AM, Monday, April 18 to midnight, Sunday, May 8, course
surveys will be online 24/7. There will be short periods that the survey
system is not available due to system back-ups. If the system is
unavailable, try again about 10 minutes later -- the system will not be
shut down for long periods of time unless there is an unanticipated
problem.

To access the surveys: www.coursesurvey.gatech.edu

Thanks
Rhonda


## 4.38 F, 4/15/04: Green's theorem

We stated Green's theorem. This expresses a line integral along a closed curve as a double integral over the interior of that curve. We proved this in the case when the domain if of Type I and of Type II and showed how one proves this if the domain is more general by cutting up the domain into a finite number of non-overlapping parts each of which is of both Type I and II. We also explained how to parametrize the boundary of a domain if that is not simply connected or even not connected (walk along the boundary in such a way that the domain is always on your left).

### 4.38.1 ANNOUNCEMENT: Format of final exam

The final exam will last 90 minutes. There will be 5 or 6 problems on it, of which at least 4 will concern material taught after the midterm.

## 4.39 M, 4/18/05: Applications of Green's formula to evaluation of some double integrals

We saw how to apply Green's formula to derive a formula for the area of a polygonal region that has been described to us by the coordinates of its vertices. We also saw how to find an analogous formula for the centroid of the polygon and for the volume of the solid that arises if we rotate a polygonal region (which is part of the right half plane ) about the -axis.

Do problems §17.5: 1, 2, 5, 6, 18-20, 26, 28, 30, 31.

## 4.40 W, 4/20/05: Justification of the role of the Jacobian using Green's theorem. Parametrized surfaces.

Suppose that a domain in the -plane is mapped to a domain in the -plane with the change of variable'' . It follows that the area of is equal to . We proved this using Green's formula.

Next we considered parametrized surfaces. A mapping , defined on some domain has a surface as its range. We then say that the mapping parametrizes . We saw how to calculate normal vectors on using the function .

## 4.41 F, 4/22/05: Surface area

We saw how to calculate the area of a surface which has been given to us in parametric form.

Do problems §17.6: 1, 2, 5, 6, 15, 16, 17, 22, 23, 35, 36.

### 4.41.1 ANNOUNCEMENT: Location of final exam

The final exam will be held in Skiles 249.

## 4.42 M, 4/25/05: Surface integrals

We saw the concept of a surface integral over a parametrized surface . In particular, we saw how to compute the total mass of a distribution on a surface with given density, as well as the centroid of that mass distribution.

## 4.43 W, 4/27/05: The divergence theorem and the differential operator .

We saw the statement of the divergence theorem:

where is a vector field and is the outward unit normal to the surface . The meaning of the left hand side can be obtained by treating

formally, so that

This quantity is called the divergence of and denoted also by div . We also saw how to define the curl of a vector field by , and properties of these new differential operators (grad, curl and div) which can be proved'' be formal manipulation of as a vector.

Last we applied the divergence theorem to the velocity vector field of the flow of an incompressible fluid (say water) and obtained that the divergence of that vector field is 0.

### 4.43.1 ANNOUNCEMENT: Review session

On Friday April 29, 2005, we will have a review session. Please come prepared to ask questions.

### 4.43.2 ANNOUNCEMENT: Material to study for the final

For the final exam you should read every paragraph from your book for which homework has been assigned. Doing that homework correctly should be more than adequate preparation.

## 4.44 F, 4/29/05: Review

Today we held a review for the material taught after the midterm, in preparation for the final.

## 4.45 F, 5/6/05: Final exam

Today we held our final exam for 90 min. The problems were the following

1. Using a double integral find the volume of the solid bounded by

and the coordinate planes.
2. Using a double integral and polar coordinates find the volume of the solid bounded below by the plane and above by the surface

3. Calculate the work done by the force

applied to an object that moves from the point to the point .
4. Evaluate the line integral

where is the rectangle with vertices oriented in the positive direction.
5. A rectangular box has three of its faces on the coordinate planes and one vertex in the first octant on the paraboloid . Determine the maximum volume of the box.

Mihalis Kolountzakis 2005-05-08